NTS311 with set of NTS-QM311 Quick jaw change base jaws

Product code: NTS311 & NTS-QM311

Quick jaw exchange gripper

Reduce jaw exchange time
Replace jaws without tools
Modification from an existing NTS gripper is possible
One set of hard jaws supports workpieces from φ20 to φ60 on NTS309
Proximity switches can not be used for the quick jaw change grippers.

Close Force(N): 1810
Open Force(N): 1930
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 20mm(dia.), 10mm(per finger)

Email a local distributor

Downloads:

Key Features

Close Force(N): 1810
Open Force(N): 1930
* Air pressure set at 0.6 MPa.
Measurement Distance L(mm): 20
Jaw Stroke: 20mm(dia.), 10mm(per finger)
Repeatability(mm): ±0.01
Mass (kg): 1.29
Air Consumption per reciprocating (cm³): 112
Air pressure (MPa): 0.2 ~ 0.8
Operating Temperature (℃): 5 ~ 60

Further information

Note 1. Please install a check valve in the air-pressure circuit so that the gripper will not release a workpiece even if the air pressure drops down.
Note 2. A reed switch bracket is attached.
Note 3: Proximity switches can not be used for the quick jaw change grippers.
Note 4. The material of internal seals of grippers is nitrile rubber. If the fluororubber seals are needed, please consult Kitagawa distributor.